An easy decision: The modern Pilot ONE, and the simple KISS/OLÉ offer a range of functionality to suit all temperature control requirements. Depending on budget and application, a controller can be selected that meets the applications requirements. If only a basic functionality is required, an inexpensive model with KISS/OLÉ could be chosen. If the application requires more extensive features, a unit that has the powerful Pilot ONE controller could be the best choice. Pilot ONE models offer the added advantage of functionality upgrades with “E-grades” where the software can be updated by entering a unit specific upgrade code.
A comparison of controller functions
KISS / OLÉ controller |
Pilot ONE controller |
Simple operation,
economically priced and robust
with all basic functions |
Brilliant 5,7" TFT colour touchscreen with
comfortable operation, high-end functions
and USB-/Ethernet interfaces |
|
|
Function / Features |
Pilot ONE
with E-grade „Professional“ |
Pilot ONE
with E-grade „Exclusive“ |
Pilot ONE
with E-grade „Basic“ |
KISS
(Circulators) |
OLÉ
(Chiller) |
|
Thermoregulation |
Temperature control mode
(Internal, Process) |
|
|
|
|
|
Programmer |
10 Prg. / max. 100 steps |
3 Prg. / max. 15 steps |
|
|
|
Ramp function |
linear,
non-linear |
linear |
|
|
|
Controller parameter tuning |
TAC (True Adaptive Control) |
TAC (True Adaptive Control) |
predefined 1 |
predefined |
predefined |
Calibration for control sensor (Internal, Process) |
5 Point |
5 Point |
2 Point |
1 Point |
1 Point |
Monitoring (Level protection, Over temperature protection) 2 |
|
|
|
|
|
Adjustable limit alarms |
|
|
|
|
|
VPC (Variable Pressure Control) 3 |
|
|
|
|
|
Venting program |
|
|
|
|
|
Compressor automatic control |
|
|
|
|
|
Set point limits |
|
|
|
|
|
Max. cooling / heating power adjustable |
|
|
|
|
|
|
Display & Operation |
Temperature display |
5,7" Touchscreen |
5,7" Touchscreen |
5,7" Touchscreen |
OLED |
OLED |
Display mode |
graphic, numeric, zoom |
graphic,
numeric |
graphic,
numeric |
numeric |
numeric |
Display resolution |
0,1°C / 0,01°C |
0,1°C / 0,01°C |
0,1°C |
0,1°C |
0,1°C |
Graphic display of
temperature curves |
Window, full screen, scalable |
Window, full screen, scalable |
Window, full screen, scalable |
|
|
Calendar, Date, Time |
|
|
|
|
|
Language: DE / EN / FR / IT / ES / PT / CZ / PL / RU / CN / JP / KO / TR |
|
|
|
DE / EN |
DE / EN |
Temperature format (°C / °F) |
|
|
|
|
|
Gesture control |
|
|
|
|
|
Favourites menu |
|
|
|
|
|
User menues (Administrator level) |
|
|
|
|
|
2nd set point |
|
|
|
|
|
|
Connections |
RS232 interface |
|
|
|
|
|
RS485 interface |
|
|
|
|
|
USB interface |
|
|
|
|
|
RJ45 Ethernet interface |
|
|
|
|
|
External control signal / ECS STANDBY5 |
|
|
|
|
|
Programmable volt-free contact / ALARM 5 |
|
|
|
|
|
AIF (Analogue interface) 0/4-20 mA or 0-10 V6 |
|
|
|
|
|
Pt100 sensor connection (to measure and control external temperature) |
|
|
|
|
|
Pt100 sensor connection (to display external temperature, not to control) |
|
|
|
4 |
4 |
|
Various |
Alarm signal optical / acoustic |
|
|
|
|
|
AutoStart (Mains failure automatic) |
|
|
|
|
|
Plug & Play technology |
|
|
|
|
|
Technical glossary |
|
|
|
|
|
Remote control via Spy-Software |
|
|
|
|
|
E-grade Evaluation versions available (valid for 30 days) |
|
|
|
|
|
Service data recorder (Blackbox) |
|
|
|
|
|
Saving/loading of temperature control programs via USB |
|
|
|
|
|
Saving/loading of device settings via USB |
|
|
|
|
|
Process data logging direct to USB stick |
|
|
|
|
|
Calendar start |
|
|
|
|
|
Note: E-grade "Professional" installed as standard on all Unistats.
1 - 30-day evaluation version TAC function available
2 - For units with integrated over-temperature protection
3 - For models with variable-speed pump or an external bypass
4 - Pt100 external sensor connection optional, only available factory fitted (additional charge)
5 - Standard on Unistats, otherwise via optional Com.G@te or POKO/ECS interface
6 - Via optional Com.G@te
Controller functions in detail
Plug & Play technology
Plug & Play technology – unique operation since 1982. The modular concept of the controllers facilitates easy field repairs and thanks to the unique Plug & Play technology, both Pilots are easily upgradeable using modern flash technology, as new software versions become available. Circulators and chillers all operate with a standard user interface; an advantage for users of multiple Huber temperature control systems. The Pilot ONE controller can be mounted remotely to control the unit via a data cable, offering unprecendeted levels of functionality and flexibility.
Process-relevant data always is always in view
The new Pilot ONE® is plain talking, gives user confidence, is easy to operate and keeps the user continuously informed of all relevant process data. The colourful LCD display shows all Pilot ONE information in plain text. Process temperature, internal (flow or jacket) temperature, pump pressure and all safety-relevant information can be read easily and quickly. The display can be varied as required and in addition to a concise but comprehensive list of data, the most important information (set-point, actual, and internal/process temperature and Over Temperature limit) are shown in a larger format, making the essentials easier to read from a distance. The temperature resolution can be displayed to 0.1 K or 0.01 K and the temperature can be viewed in Celsius or Fahrenheit format. Depending on the configuration of the system, the pressure is variable using the “VPC” (Variable Pressure Control) feature protecting against breakage, e.g. glass reactor. The parameters of the PID control system can be manually adjusted or with intelligent “TAC” (True Adaptive Control) – the self-optimizing cascade control is fully automated, ensuring tight control and the best results through highly dynamic responses. The “set-point limit” function, “Programmable alarms” and the user-defined alarm actions add further dimensions to safe working practices.. In the event of a problem, visual and audible alarms can be activated. The clock and calendar functions allow individual settings for “auto-start” in the event of power failure or a timed automatic commencement of a program. A calibrated function facilitates both off-set and span calibrations of the internal and (optional) process sensors. Depending on the software version, a digital and/or analogue interface records data.
E-grade® – extension of the range of the functions according to need
E-grade® – innovative activation keys for functionality upgrades to suit your budget and process requirements. Every application requires specific functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative E-grade (Electronic Upgrade) has the answer. Units with the Pilot ONE, supplied with the basic version, have a comprehensive range of functions suited to classic temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade is simple to do! To extend functionality, a unit specific code is entered via the controller. This code is specific to the serial number of the unit and can be pre-ordered (entered at the factory) on new units or activated at a later date by the user. The code is sent by email and there are no hardware or software updates required. See page 16/17 for the table of functions offered by each E-grade.
Self-optimising temperature control
Varying research criteria and process demands change the thermal load on the temperature control system. What does not change is the requirement for good control. The solution is „TAC” which has the capability to automatically change with those demands, By building a multi-dimensional model of the process, the TAC is able to automatically adjust its PID parameters to cope with and respond rapidly to sudden changes in the process. Operating in both „Jacket” and „Process” control, TAC provides responsive and close control. Rapid changes with no overshoot, that is what TAC brings to the process – automatically and under all conditions. User defined ramp rates allows for faster or slower response. If TAC is not required, the user can manually adjust the PID parameters.
Pressure control with controllable soft start
VPC was developed to protect glass reactors from damage caused by high fluid pressure. VPC also compensates for changes in viscosity as heat transfer fluid is heated and cooled. Unistats for typical laboratory applications have a variable speed pump with soft-start, and using a pressure sensor can control their maximum fluid pressure. Unistats with larger capacities (as an option) can control the pressure using a pressure sensor and a stepless bypass. Minimal pressure and maximum flow encourages optimal heat transfer. The VPC allows enables the best operation while remaining within the defined pressure limits of the application.
Programmer
Single temperature changes can be achieved using the linear ramp function. The easy to use programmer, with 100 steps, is available for more complex temperature requirements. Individual steps can be pieced together to form a profile. Each step of the program can be selected to be either temperature or time stable. For each step, additional functions (Potential Free contact, Analogue Interface, temperature control mode) can be activated or deactivated.Designed for crystallisation processes, non-linear temperature profiles allow higher purity crystals to be produced. Instead of using the temperature programmer to piece together rectangular or linear ramps, e-functions can be used to define a continuous setpoint form. The diagrams shows the high precision of the e-function (below) in contrast to a linear ramp (above, with 6 steps).
Safety
Unistats have many features for handling temperature control applications remotely and safely during continuous operation. Over-temperature, setpoint and alarm limits can be adjusted according to the conditions of the application. The temperature and pressure sensors can be calibrated and the microprocessor controller monitors the operating status. VPC (Variable Pressure Control) monitors the maximum pressure in the fluid loop. Passive components ensure a extraordinarily high level of reliability.
In case of emergency, Unistats can be electrically isolated. For critical processes Unistats offer emergency cooling. „Process safety over-temperature protection”: This unique user-activated feature disables the heater while initiating 100 % cooling should an over-temperature condition be caused by a thermal runaway in the process.
Two ATEX complient solutions are available for ATEX zones 1 & 2 : The Unistat can be placed in a Stainless Steel Ex-p pressure enclosure. Compressed air is pumped in purging the cabinet of any potentially dangerous vapours and creating a pressure slightly above atmospheric. Alternatively an ATEX certified controller II 2G Ex ib IIC T4 is located in the ATEX zone, controlling the Unistat situated in the safe zone.
Communication
The Pilot ONE temperature controller has USB and LAN interfaces fitted as standard: Data can easily be stored directly onto a USB stick via the USB ports on the Pilot ONE. The USB port also allows connection to a PC or notebook. Together with the spy software, requirements such as remote control or data transmission are easy and cost-effective.
The built-in RJ45 Ethernet connection on the Pilot ONE controller allows easy integration of Huber temperature control systems into LAN networks. Remote control, data logging, or integration into process control systems is also straightforward.
Interfaces and data communication
Where the application requires additional connections, depending on the model, the following optional interface module are available:
Interface module Com.G@te: The Com.G@te has connections which comply with the NAMUR Standard and is fitted on all Unistats. The Com.G@te has the following interfaces integrated:
- RS232 / RS485 (bidirectional)
- Volt free contact (programmable)
- AIF Analogue Interface 0/4-20mA or 0-10 V
- ECS external control signal
Software
SpyControl is software which offers all the functions of SpyLight. In addition it allows the user to control one or more machines with a programmer. The user can provide temperature programs for the machines, which then automatically run. Segments of a temperature control program can be entered easily using the Temperature control-Xplorer which is a module of SpyControl. The temperature control programs produced can be modified or changed and archived. The basic course of a temperature control program can also be displayed graphically.
The SOFTWARE....
www.youpopmarketing.co.uk
|